
The telephone connections that link your home's phones typically include four wires: red, green, yellow, and black. For each phone line you have, they are utilized in pairs. Since wires are sometimes referred to as "pairs" by repairmen, a normal four wire telephone connection actually has two pairs.
Telephone lines use RJ11 connections. Your phone line is being used to connect to ADSL, which is why there is an RJ11 connector. Ethernet and WiFi are connected via your TP Link WiFi router. RJ45 connections are used in 100BASE-TX Ethernet networks.
The three cables that are used to transfer power between two locations are:
A live wire (L)The neutral wire (N)
In traditional PSTN telephone networks, RJ11 is utilized. The telephone cables are terminated with 4 pin connectors. To connect a telephone to the wall and a handset to the phone, use the RJ11 connector.
The location of their actual use is the primary distinction between these two. In networking (Ethernet LAN), RJ45 connectors are used to connect computers and other network components to one another. In telephone sets, the cable connector is known as RJ11.
RJ45 jacks can accept regular "square" RJ14 cables as long as the port is connected to your phone line. It ought should lock in. You must ascertain where each port is wired. Save this response.
Comparative tableRJ11 to RJ45Bandwidth
About 24Mbps may be supported via RJ11 connections. RJ45 connectors can support 10Gbps via Ethernet, but only if the other hardware, such as network cables, can as well.
Size and formbr>compact and square in form more rectangular and longer
Problems with RJ11 and RJ45 ConnectorsBoth RJ11 and RJ45 connectors have the flaw of not being waterproof. As a result, they shouldn't be applied in settings where they will be exposed to the weather. The lack of durability of RJ11 and RJ45 connectors is another disadvantage.
GreenCables are commonly used for crossover ethernet connections, while grey cables are used for normal ethernet connections. Blue wires are used for terminal server connections, whereas yellow cables indicate POE (power over ethernet).
Your POTS line has two wires, one of which is referred to as the tip wire and the other as the ring wire. Your pair could be made up of a wide variety of color combinations.